HobbyD rewards your purchases by offering you loyalty points which you can convert into discount vouchers. Vouchers provide dicounts on products or cover the costs of goods so you only have to pay the transportation charges. For every Euro spent, you receive one point which corresponds to 2 centimes which you can use on subsequent purchases. Should the full value of the voucher not be used, another voucher is issued with the remaining amount.
Compare
Top sellers
-
BRASS BRUSH 13 MM (536) BLISTER OF 2 PCS
Brass brushes are non-sparking and softer than steel.They will not scratch soft metals like gold, copper, brass. Learn10,55 €
-
DREMEL EZ SPEEDCLIC: DETAIL ABRASIVE BRUSH 36 GRIT (471S)
The Detail Abrasive Brushes have very flexible bristles which allow removal of the exterior “surface layer” without damaging the base layer below. This can be used for deburring, cleaning, finishing, and polising of detailed parts, tiny areas and irregular places. Learn9,40 €
-
DREMEL EZ SPEEDCLIC: METAL CUTTING WHEELS 5-PACK. (SC456) BLISTER...
Dremel, the inventor of the EZ SpeedClic quick-change system for rotary tool accessories, now offers an extended line of EZ SpeedClic metal cutting accessories. The Starter Set SC406 includes the unique EZ SpeedClic mandrel and two fiberglass reinforced metal cutting wheels. The SC456, SC456B and SC409 are replacement metal cutting wheels, whereby the... Learn14,05 €
-
6,91 €
-
TUNGSTEN CARBIDE CUTTER SQUARE TIP 3,2 MM (9901)
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. Learn15,35 €
-
POLISHING WHEEL 13 MM (414) BLISTER OF 6 PCS.
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402. Learn3,50 €
-
SPIRAL CUTTING BITS MULTIPURPOSE (561) BLISTER OF 3 PCS.
The multipurpose cutting bit 561 cuts wood, plastic, fiberglass, drywall, laminate & vinyl siding. The tile cutting bit 562 cuts ceramic wall tile, cement board and plaster. (Not for use on floor tile) Learn15,35 €
-
ROUTER BIT (HSS) 6,4 MM (654)
Straight Bits. General purpose routing or grooving. Learn10,55 €
-
DREMEL STYLO+ (2050-15)
The Dremel 200-series is the ideal multitool to get started with Dremel. It's easy and comfortable the use and offers trusted Dremel quality and reliability at an affordable pricepoint. The tool is compatible with all accessories and attachments, and with the enclosed accessories for sanding, metal cutting and grinding the user can start working with... Learn69,30 €
60,29 €
-
FLAP WHEEL 4,8 MM (504)
Perfect for sanding flat or contoured surfaces on metal,wood, rubber or plastic. Learn9,40 €
-
DREMEL Multi-Vise (2500)
The Dremel 3-in1 Multi-Vise. Stationary vise, stand alone clamp & Toolholder. Clamps to any workbench, table or countertop Rotates 360° and tilts 50°. Allows approaching the workpiece from a comfortable angle. Jaws may be used with base unit or detached for use as a stand-alone bar clamp. Easily accommodates larger work pieces. Stabilises oversize... Learn47,00 €
-
Multipurpose Cutting Kit (565)
Provides controlled cutting in a variety of materials. Easily attaches to your Dremel tool. Easy depth adjustment up to 19 mm material thickness. Learn21,20 €
-
ENGRAVING CUTTER 0,8 MM (111) BLISTER OF 3 PCS.
Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. Learn11,75 €
-
ALUMINUM OXIDE GRINDING STONE 15,9 MM (8193) BLISTER OF 2 PCS.
Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials. Learn7,10 €
-
DREMEL EZ SPEEDCLIC: SANDING DISCS (SC411) BLISTER OF 6 PCS.
The EZ SpeedClic Sanding Discs are great for light sanding and shaping. The discs are available in 60 and 240 grit with a diameter of 30mm and are compatible with the SC402 mandrel. Change discs without using a wrench! The EZ SpeedClic sanding discs last 2x longer and remove 2x more material than the Dremel 411 and 413 sanding discs. Quick, Easy, Keyless. Learn7,10 €
-
DREMEL EZ SPEEDCLIC: SANDING DISCS (SC413) BLISTER OF 6 PCS.
The EZ SpeedClic Sanding Discs are great for light sanding and shaping. The discs are available in 60 and 240 grit with a diameter of 30mm and are compatible with the SC402 mandrel. Change discs without using a wrench! The EZ SpeedClic sanding discs last 2x longer and remove 2x more material than the Dremel 411 and 413 sanding discs. Quick, Easy, Keyless. Learn7,10 €
-
SANDING BAND & MANDREL 6,4 MM 60 GRIT (430) BLISTER OF 2 PCS.
For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Learn9,40 €
-
CLEANING / POLISHING SET - 20 PIECES (684)
All you need for cleaning and polishing in a convenient box. Removable accessory tray and 3 dividers provide perfect storage solution. Dremel Quick Start leaflet explains the included accessories. Learn23,45 €
-
4,58 €
-
ROUTER BIT (HSS) 3,2 MM (650)
Straight Bits. General purpose routing or grooving. Learn10,55 €
-
POLISHING COMPOUND (421)
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402. Learn4,60 €
-
Mini Saw Attachment (670)
Transforms your Dremel tool into a precision circular saw for fine, clear and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. The safety guard and lower guard make it safe to use the circular saw blade. The guide allows to make straight cuts. Quick connect attaches your Dremel tool in seconds. This Mini... Learn47,00 €
-
DREMEL 7 MM MULTIPURPOSE HIGH TEMP GLUE STICKS (GG01) BLISTER OF 12...
To be used on Dremel model 910 (165°). Glues a variety of materials, such as wood, plastics, ceramics, textile, etc. Learn7,10 €
-
IMPREGNATED POLISHING WHEEL (520)
Impregnated polishing wheel for light stock removal and high luster polishing.Works on various surfaces like steel, aluminium, brass, silver, gold, hard plastic etc. The polishing wheel is impregnated with a silicon carbide abrasive and cooling lubricant, so polishing compound is not needed. Learn7,10 €
-
STAINLESS STEEL BRUSH 19 MM (530)
Stainless steel brushes do not cause “after rust” when used on corrosive-resistant materials like pewter, aluminum and stainless steel. Learn10,55 €
-
MULTIPURPOSE ROUTER BIT SET (7 PCS) (660)
The Dremel wooden box (660) contains 7 router bits (612, 615, 640, 650, 652, 654 and 655) Learn59,05 €
-
2,05 €
-
DREMEL 3000 (3000-15)
This kit includes the Dremel 3000 multitool and 15 genuine Dremel accessories, all packed in a convient bag. This execution is the entry level kit, offering the Dremel 3000 with a selected amount of accessories. Learn80,85 €
70,34 €
-
DREMEL EZ SPEEDCLIC: PLASTIC CUTTING WHEELS 5-PACK. (SC476) BLISTER...
These cutting wheels are specially designed for cutting in all sorts of plastics. Quick, Easy, Keyless. Learn14,05 €
-
DREMEL 7 MM MULTIPURPOSE LOW TEMP GLUE STICKS (GG02) BLISTER OF 12...
To be used on Dremel model 920 (105°) and 930 (low-temperature - 165°). Glues a variety of heat sensitive materials, such as paper, carton, delicate textile, etc. Learn7,10 €
-
Right Angle Attachment (575)
Designed to use accessories in right angle for hard to reach places. Ball bearings and spiral bevel gears provide smooth and cool operation and guarantee longer lifetime. Coupling system allows to place the attachment in 12 different directions on your Dremel tool. Quick connect attaches your Dremel tool in seconds. Learn41,30 €
-
DREMEL VERSATIP PYROGRAPHY ACCESSORIES SET (204)
These new Dremel pyrography accessories are used to apply different pyrography motifs onto wood and leather. The set includes four tips with different shapes: ball point, oval, sharp point and pattern. Applications include drawing, shading, striping, etc. All tips are to be used with the Dremel® Versatip. Learn27,10 €
-
3,45 €
-
DIAMOND WHEEL POINT 4,4 MM (7105) BLISTER OF 2 PCS.
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Learn27,10 €
-
DREMEL EZ SPEEDCLIC GRINDING WHEEL (SC541) BLISTER OF 2 PCS.
The Dremel SC541 Grinding Wheel is ideal for grinding and deburring different types of metal. Because of the glass fibre reinforced 38mm diameter wheel you can grind faster and more efficiently. The EZ SpeedClic system enables quick, easy and keyless accessory change. Learn10,55 €
-
POLISHING WHEEL 26 MM (429) BLISTER OF 3 PCS.
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402. Learn7,10 €
-
MANDREL (402) BLISTER OF 4 PCS.
Mandrels are used to mount different accessories, like felt polishing wheels or cut-off wheels. Learn10,55 €
-
WOOD DRILL BIT SET (4 PCS) (636)
The Dremel wood drill bit set contains 4 drill bits with centering point for drilling into wood. The different drilling diameters included are 3, 4, 5 and 6 mm. The titanium coating offers high performance and longer lifetime. Learn15,35 €
-
Chainsaw Sharpening Attachment (1453)
The fastest, easiest way to sharpen dull, slow-cutting chain saws. Easily attaches to your Dremel tool. Works with a variety of different chain sizes. For compatibility with the Dremel 4200 please check the compatibility overview on the rear of the packaging. Learn16,50 €
-
SOLDERING TIPS (201) BLISTER OF 2 PCS.
Soldering Tips. For the Dremel VersaTip 2000 and the VersaFlame 2200. Learn14,05 €
-
TUNGSTEN CARBIDE CUTTER SPEER TIP 3,2 MM (9910)
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. Learn15,35 €
-
ROUTER BIT (HSS) 4,8 MM (652)
Straight Bits. General purpose routing or grooving. Learn10,55 €
-
CHAINSAW SHARPENING GRINDING STONE 4 MM (453) BLISTER OF 3 PCS.
Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453 Learn8,20 €
-
POLISHING POINT 10 MM (422) BLISTER OF 4 PCS.
Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 425 with mandrel 402. Learn10,55 €
-
Flex-Shaft Tool Holder (2222)
Conveniently suspends your Dremel multitool above your workbench. Perfect for use with the Flexible Shaft attachment. Clamps to workbenches up to 42 mm thick, and adjusts in height from 300 to 1070 mm. Store extra bits on base. Learn35,50 €
-
DREMEL DSM20 METAL AND PLASTIC CUTTING WHEEL (DSM510) BLISTER OF 3...
The DSM510 is a reinforced type 1 abrasive cutting wheel which is designed to cut a variety of materials such as metal and plastic. Learn11,75 €
-
DREMEL 8220 (8220-5)
The Dremel 8220 variable-speed cordless rotary tool offers the highest performance and versatility of all Dremel cordless rotary tools. The strength of its motor facilitates maximum performance at all speed levels. The ability to use all current Dremel rotary tool accessories and attachments let the Dremel 8220 complete a wide range of projects. A slim... Learn144,90 €
126,06 €
-
ENGRAVING CUTTER 0,8 MM (108) BLISTER OF 3 PCS.
Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals. Learn9,40 €
-
DIAMOND WHEEL POINT 2,0 MM (7134) BLISTER OF 2 PCS.
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Learn17,65 €
-
HEAVY DUTY CUT-OFF WHEEL 24 MM (420) BLISTER OF 20 PCS.
For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced cut-off wheels (426) and heavy duty wheels (420) are for tough applications. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes. Use Dremel cut-off wheels... Learn11,75 €
Categories
- Multitool system
- Benchtop Tool System
- Compact Tool System
- Arts & Crafts
- 3D Printers
